• <pre id="dctqs"><label id="dctqs"><xmp id="dctqs"></xmp></label></pre>
    <object id="dctqs"><nav id="dctqs"></nav></object>
  • <tr id="dctqs"></tr>

  • <table id="dctqs"><noscript id="dctqs"></noscript></table>
  • <acronym id="dctqs"><label id="dctqs"></label></acronym>

    歡迎來到黃山市德邦粉體材料有限公司企業官網!

    產品展示

    TP20 Wrinkle Agent

    2021-04-20     瀏覽次數:1019    

    Description?

    Winkle agent TP20 is also called as watermark agent. It is a kind of metal organic complexes which has a strong effect of curing acceleration, making the gel time very short and the coating has no time for leveling, thus can produce the well distributed wrinkle pattern like ground glass.

    After the formula is adjusted, it is can produce sand texture, wrinkles and turtle shell textures.

    ?

    Technical Parameters

    Item

    Test Methods

    Specification

    Appearance

    Visualization

    Yellowish powder

    Melting Range (℃)

    GB/T617-2006

    190-196

    Purity%

    GB/T1725-2007

    ≥98.5

    Curing Condition

    180℃/20-25min;190℃/ 15min;200℃/10-12min.

    ?

    Application

    Used for producing fine wrinkle surface or other art powder such as sand texture and turtle shell texture .

    ?

    Use method % characteristics

    The dosage over 5wt% of the resin mixed with other materials and extruded .in the process of producing wrinkle coatings, the surface form is related to the dosage of TP20 and fillers. The more fillers used, the smaller wrinkle obtained.

    ?

    Suggested Formulation

    Raw material

    Bottom powder

    Formula?1

    Formula 2

    Formula

    3 hybrid 7:3

    remarks

    Epoxy Resin E-12

    60wt%

    60

    60

    560-580


    Polyester TP4060

    3wt%

    0

    5

    N/V

    Use little 6:4 and 7:3 polyester to make texture big

    Dicyandiamide

    2.4wt%

    3

    3

    22-24

    Dosage :4-5% of epoxy

    Wrinkle Agent TP20

    3.6wt%

    3

    3

    19-23

    Can reduce to 2

    Flowing Agent TP88

    0.2wt%

    0.2%

    0.2%

    2

    Small dosage?filler

    gets big texture, Vice versa

    Pigment and filler

    30-50%

    30-50%

    30-50%

    300-

    500%

    Eliminate pitting and bright spots

    ?

    Extruding temperature: 90-100 °C, sieve through 140 mesh sieve

    Due to the strong effect?curing ?acceleration of?TP20, please extruding?with low temperature

    ?

    Take above formulation as base powder, than dry blending 0.1?0.2%?TP80( turtle shell texture agent )can obtain turtle shell texture or snow pattern.

    ?

    Spray thick thickness for big texture, otherwise, the coating will be shining; or spray thin thickness for small texture. Curing condition: 200°C/15min.

    ?

    Used in hybrid or pure polyester system can get the effect of wrinkle and sand texture.

    ?

    TP20??can also use as dry blending. Dry blending?TP20?will consume smaller dosage compare with extruding, and the texture more coarse.

    ?

    Try to not breathe the product dust for a long time, or else will arise symptoms feel like common cold. After disengagement of dust exposure, the symptoms will disappear in one week.

    ?

    Package & Storage & Handling

    1.Available in polyethylene-lined, multi-ply paper bags, N.W.?25KGS/Bag.

    1.?Storage in cool and dry place, avoid contact with skin and eyes; wear dust mask?when operating; wash with water after?operation.

    2.?Validity will be 1 years under normal?temperature.

    ?


    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?

    ?


    返回上一步
    打印此頁
    QQ:1037432980
    Skype:msjane881
    微信公眾號
    日韩人妻在线-国产无码电影-亚洲911国产精品-无码午夜片在线